rolling shutter slats door roll forming machine roller Technology
CNC Stainless Steel Grill Door Design forming Machine
Rollr Shutter Door Roll Forming Machine
|Host big frame||steel welding|
|Forming axial material||45# ,steel welding|
|Molding pressure roller material|
45# ,steel welding
Hard chromium plating processing
|Chain specification||0.6 inch|
|Equipment total power||3+3kw|
|Rolling material thickness||0.3-0.8mm|
|The rolling electric plating thickness||0.05mm|
Cutting knife material
The Chart of Process Flow:
manual uncoiler - roll forming machine - computer control system -
hydraulic control system - cutting system - output table
Components and Technical Specification
1. Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand. Loading
Inner diameter: 500-508mm
2. Feeding Table
Put the raw material(steel plate) through the beach to manufacture
and process, it can guarantee that the products are neat, parallel
and everything is uniformity. Please refer to the equipment
regulation to know the function of locate angle iron.
3. Hydraulic System
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
4.Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use.
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment
It adopts welded steel and supported roller to transmit the
products,which is used to collect the finished products.